CIP/COP Combination Washers
A Schlueter Safgard COP-CIP Jet Washer can wash equipment faster, easier and more thoroughly than has been done before! Just prepare the wash solution, and start it right up. Parts are placed in the tank, jet-scrubbed, then removed; and with choice between two (2) polished butterfly valves with tee installed, two (2) air-actuated butterfly valves with tee, or one (1) three-way valve installed in the pump discharge line your washer is easily used for CIP cleaning-in-place work.
CIP Capabilities: In one serviceable unit you have a CIP and COP Washer – no duplication of equipment is needed. If the return line from a CIP system is properly placed in the tank you can clean fittings while the CIP work is also being done. High velocity jet cleaning of separator parts, ice-cream and popsicle molds, freezer parts, partially or completely disassembled fittings, pipe sections, and milk packaging machinery parts can be done in 5 to 30 minutes, depending on amount of soil to be removed.
Category: Application Equipment, Clean Out of Place
More Information
For CIP Washing, the COP tank serves as a great reservoir, and the large 10 hp pump easily handles most CIP systems. A second three-way valve mounted in the pump suction permits isolation of the pump and reservoir tank for individual use.
Temperature & Monitoring Options: The tank has provisions for automatic steam heat regulation and thermowell for recording thermometer. Immersion type inconel sheathed electric heating elements can be provided for heat control. Recording and timing devices may be interconnected with the pump.
URWJ Washer for COP-CIP Combination:
Model URWJ with in-line heating and control equipment for COP-CIP combination
- 100 Gallon, URWJ-100 with Ball Feet
Dimensions: 78 ½” L x 24″ W x 40″ H plus allowance for three-way valve and steam regulator. Inside Dimensions: 74 ½” L x 20″ W x 18″ Deep. - 75 Gallon, URWJ-75 with Ball Feet
Tank Construction: Type 304/316L Stainless Steel. Tank body is formed of 14 ga. No. 2B finish Stainless with 1″ radius corners and top edges. Parts are all weld assembled with all welds ground and polished.
Legs/Feet: Formed of 1 ½” Stainless Tubing and double leg cross-ties add strength and serve as pump and motor support. Standard with SS adjustable ball feet; or option of casters with 5” Heavy-duty, non-marking wheels, Part # 30393 set of (4).
Valves/Fittings: Stainless piping has sanitary tri-clamp connections for easy disassembly. Fittings welded in the tank for thermowells and steam injection are 1″ and ½” IPT. All parts are readily disassembled except manifold which has inspection caps on ends.
Formed Tubular Jet Manifold: Piping and pump base has inspection and cleanout caps on the end, and standard jets are clean-bore and self-draining for great sanitation.
Pump: Stainless Head, 5-15 HP 3/60/220/440 Motor or Sanitary Style Pump. Centrifugal type, high head, large volume. Industrial (unpolished) cast stainless head.
Motor: 5, 10, or 15 HP, 220/440 Volt, 3450 RPM, 3-Phase, TEFC, with sanitary mounting device.
Installation: Standard washing station facilities of power, water, and steam needed for operation.
Steam Regulator: ½” Powers Self-Actuating with stainless thermowell, mixer and piping for in-tank heating. Additional sizes, ¾”, 1”, 1 ¼” and 1 ½” available.
For Combination COP-CIP and any CIP Work Tank Needs Optional:
One three way valve needs to be installed in the pump discharge line, or can use two (2) manual polished butterfly valves with tee installed, or two (2) air-actuated butterfly valves and tee.
For all jobs or CIP work that includes recirculation washing of holding tanks without need for a return pump: The washer should have a three way valve or 2 butterfly valves and tee, as well as a two port temperature control manifold in the pump suction line, and a steam heat tee for steam injection in the pump discharge line.
Methods of Heating the Wash Solution Include:
Steam heat coil: 24 ft. ¾” Type 316 stainless pipe installed in tank bottom which eliminates dilution of wash solution,
Electric immersion heating elements: Mounted in tank with sealed stainless terminal box and in-tank shield.
- Electric Heater w/ case for 100 Gal. Tank w/ three 316 SS elements, 11” Long, Part #: 30505
3.5Kw, 60-250F Pilot, 480V, 3 PH - Electric Heater w/ case for 150 Gal. Tank w/ three 316 SS elements, 14” Long, Part #: 30506
5.2 Kw, 60-250F Pilot, 480V, 3 PH - Electric Heater w/ case for 200 Gal. Tank w/ three 316 SS elements, 18” Long, Part #: 30507
6.9 Kw, 60-250F Pilot, 480V, 3 PH - Electric Heater w/ case for 250 Gal. Tank w/ three 316 SS elements, 21” Long, Part # 30508
8.5 Kw, 60-250F Pilot, 480V, 3 PH - Electric Heater w/ case for 300 Gal. Tank w/ three 316 SS elements, 24” Long, Part #: 30509
10.25 Kw, 60-250F Pilot, 480V, 3 PH
Direct injection of steam through a self-actuating steam regulator: Regulator includes stainless piping, stainless thermowell, stainless steam injector, the ports in the tank, and an additional port in the tank for insertion of a recording thermometer thermobulb to be used in CIP work.
(Pictured Above: Smaller Size Portable Mini CIP/COP Combination Washer)
