Internally Fed Rotary Drum Strainers
Schlueter Safgard Internally Fed Rotary Drum Strainers:
(Roll Dry and Wring Dry Systems)
Schlueter Safgard is a leader in Process, Separation, sanitation and ecology systems and equipment. Over 100 years of experience in design, engineering, and manufacturing and installation in food, process, industrial and municipal.
Roll Dry and Wring Dry Internally Fed Rotary Drum Strainers are used for the removal of liquids from solids. Among the industries that use these equipment models are Canning, Citrus, Meat, Poultry, Vegetable and other food related industries, Agriculture, Chemical and Petrochemical, Pulp and Paper, Forest and Wood Products, Paint and Industrial Finishing, Power Plants, and Municipal Sludge Separations.
Pictured Left: Safgard Internally Fed Roll Dry Rotary Drum Strainer
Category: Application Equipment, Rotary Drum Strainers
Roll Dry
Roll Dry Internally Fed Rotary Drum Strainers:
Engineered Advantage:
- The Safgard Roll Dry Internal Rotary Drum Strainers are designed with a minimum of parts for mechanical reliability and service life.
- Economic benefits provide savings in product, time and labor.
- Strainer drum is constructed of wedgewire, helicol wound, screen, stainless steel, providing easy flow through of liquids. Perforated drums available upon request.
- Drive systems available for electric, hydraulic and pneumatic operations.
- Drive unit is double chain driven eliminating slippage in wet or greasy environments.
- Unit allows for easy cleaning, inspection and maintenance in place.
| Sizing Reference Roll Dry Internally Fed Rotary Drum Strainers | |||||||
|---|---|---|---|---|---|---|---|
| Strainer Slot Opening | 0.01 | 0.02 | 0.03 | 0.04 | 0.05 | 0.06 | 0.1 |
| Mesh Equivalent | 60 | 30 | 22 | 16 | 13 | 11 | 8 |
| Microns | 250 | 500 | 750 | 1000 | 1250 | 1500 | 2500 |
| Model- Flow Rate | GPM | GPM | GPM | GPM | GPM | GPM | GPM |
| Model 24-48 | 504 | 882 | 1175 | 1411 | 1603 | 1764 | 2205 |
| Model 24-60 | 630 | 1103 | 1468 | 1764 | 2004 | 2205 | 2757 |
| Model 36-48 | 1230 | 2154 | 2868 | 3441 | 3915 | 4308 | 5385 |
| Model 36-60 | 1538 | 2692 | 3586 | 4307 | 4895 | 5385 | 6731 |
| Model 36-72 | 1845 | 3230 | 4303 | 5169 | 5873 | 6462 | 8076 |
| Model 48-48 | 1888 | 3306 | 4404 | 5289 | 6010 | 6611 | 8265 |
| Model 48-60 | 2360 | 4133 | 5504 | 6611 | 7513 | 8265 | 10,331 |
| Model 48-72 | 2833 | 4959 | 6605 | 7935 | 9015 | 9918 | 12,398 |
| Model 60-60 | 3300 | 5776 | 7694 | 9242 | 10,503 | 11,553 | 14,441 |
| Model 60-72 | 3960 | 6932 | 9233 | 11,090 | 12,602 | 13,863 | 17,329 |
| Model 60-84 | 4619 | 8081 | 11,711 | 19,938 | 14,702 | 16,174 | 20,218 |
Sizing selection:
Determined by application, flow rate, solids load process characteristics and technical criteria established through experience. All design aspects of the application must be considered to determine model selection.
Flow Capacities:
RDS flow capacities are based on selection criteria above, and design parameters of the standard units. The sizing reference chart is for reference only. Flow rates handled by each model can vary.
| Spare Parts List for Roll Dry Internally Fed Rotary Drum Strainer(**Most for Wedgewire) | |
|---|---|
| Item / Spare Parts Description | Part Number |
| Large #1 Tooth Gear (UHMW-Polyethylene) | 31938 |
| Small 20 Tooth Gear (UHMW-Polyethylene) 4-Bolt | 31939 |
| 6" Diameter Polyethylene Wheel (HDPE) Grooved | 31940 |
| Wheel Bearing Set | 31941 |
| Brush Bearing (1" Bore, 6-Bolt) | 31939-1 |
| Axel with Nuts | 31942 |
| Nozzles for Spray Bar | 31943 |
| Axel for Wheels | 31934 |
Benefits:
- Improved Product Recovery
- Improved Liquid Recovery / Reuse
- Cleanup Process Effluent
- Remove Solids, Sludges, and Surface Debris
- Improve Process Operation / Performance
- Reduce Sewerage Requirements and Surcharges
- Increased Production Efficiency
Wring Dry
Wring Dry Internally Fed Rotary Drum Strainers:
Engineered Advantage:
- Strainer drum constructed with a Perforated Stainless Steel Drum, providing easy flow through of liquids. (Helicol wound stainless drums are also available upon request).
- Drive Systems are available for electric, hydraulic and pneumatic operations.
- Drive Unit is gear driven, eliminating slippage in wet or greasy environments, and engineered for consistent torque and long life.
- Brush and Spray Wash Bar allows for easy cleaning, inspection and maintenance in place. Rotating Brush and Spray Wash Bars prevent the drum from clogging so it maintains maximum separation of liquids from solids.
Pictured Above: Basic Parts diagram of a Safgard Wring Dry Internally Fed Rotary Drum Strainer
*Pictured Below: Wring Dry Internal Fed Rotary Drum Strainer by Safgard
| Wring Dry Model 25-72 RDS-IF - Outlet flow based on 10/1200 GMP 4" Head above outlet 25" Dia. X 72" Long | ||
|---|---|---|
| Connection Size | Inlet GPM Gravity based on 12" head feeding inlet | Outlet GPM Gravity with 4" of head above outlet |
| 4" | 200 | 110 |
| 6" | 425 | 245 |
| 8" | 750 | 430 |
| 10" | 1200 | 680 |
| 12" | 1700 | 980 |
| 14" | 2350 | 1330 |
| 16" | 3000 | 1740 |
| 18" | 3850 | 2200 |
| 20" | 4800 | 2700 |
| 22" | 3290 | |
| 24" | 3900 | |
| 26" | 4600 | |
| 28" | 5330 | |
| 30" | 6,120 | |
Sizing selection:
Determined by application, flow rate, solids load process characteristics and technical criteria established through experience. All design aspects of the application must be considered to determine model selection.
Flow Capacities:
RDS flow capacities are based on selection criteria above, and design parameters of the standard units. The sizing reference chart is for reference only. Flow rates handled by each model can vary.
| Spare Parts List for Wring Dry Rotary Drum Strainers Models 25-72 with Perforated Drum | ||
|---|---|---|
| Quantity Used in RDS | Description | Part Number |
| 1 | #31932 Shaft Sleeve | 31932 |
| 1 | #31935 Variable Gear Motor Inline 1 HP | 31935 |
| 1 | Variable Gear Motor Right Angle | 31936 |
| 1 | Constant Speed Motor Inline 1 HP 110 RPM | 31937 |
| 1 | Large 81 Tooth Gear (UHMW-Polyethylene) | 31938 |
| 1 | Small 20 Tooth Gear (UHMW-Polyethylene) 4-Bolt | 31939 |
| 2 | Brush Bearing | 31939-1 |
| 2 | 6" Diam. Polyethylene Wheel (HDPE) Grooved | 31940 |
| 2 | 6" Diam Polyethylene Wheel (HDPE) Flat | 31933 |
| 8 | Wheel Bearing Set (Set = 1 Bearing/1 Race) | 31941 |
| 2 | Axel with Nuts | 31942 |
| 13 | Nozzles for Spray Bar | 31943 |
| 2 | Brushes 1 Shaft x 5" Diam. (Brush Only) | 31944 |
| 1 | 1/2 Two Way Solenoid Valve | 31945 |
| 1 | Gasket (2 Per Set) | 31946 |
| 4 | Axel for Wheels | 31934 |
| 1 | Cylinder | 31928 |
| 1 | Water Inlet Filter | 31948 |
| 1 | Shaft for Brushes | 31949 |
| *Above Listed Both Constant Speed and Variable Speed Drives. Please Be Sure to Order the Model on Your Unit | ||
