Sanitary Pipe COP Washer
Safgard Sanitary Pipe Washer:
These Tanks are especially designed for washing of various lengths of pipe up to 12 feet as well as hoses and fittings. The basic tanks can be used for either (A) manual brushing of individual pipes, (B) provided with power brush assembly (AP119), (C) Push-Pull recirculation pipe washing, or (D) both (B) and (C).
Model 119 Sanitary Pipe Cleaning Tank:
Tank Model 119-1S is constructed of 304 stainless steel, 14 gauge, No. 2B Finish, radius corners, and stainless steel tubular legs with adjustable ball feet.
Pictured Left: Safgard Sanitary Pipe Jet Recirculation Push-Pull Washer Model 119-1SR (10′ Pipe Wash Tank 2 ½” inside length x 16″ width x 12″ depth)
Category: Application Equipment, Clean Out of Place
More Information
ID Tank Dimensions:
16″ W x 11 ½” D x various lengths, select preferred length as listed below, includes drain board and pipe rack hangers.
119-1S One Compartment Tank Part Numbers:
- 12′ Tank Part Number 30020
- 11′ Tank Part Number 30021
- 10′ Tank Part Number 30022
- 8′ Tank Part Number 30023
- 6′ Tank Part Number 30024
Two Compartment Tank Models 119-2S:
- 12′ Tank Part Number 30060
- 11′ Tank Part Number 30061
- 10′ Tank Part Number 30062
- 8′ Tank Part Number 30063
- 6′ Tank Part Number 30064
Safgard’s Push/Pull Operation: To make the 119-1S or 119-2S an efficient Safgard COP system with maximum washing solution action with thorough cleaning through long pipes laid anywhere in the tank, installing the Safgard push-pull recirculation system with 5 hp pump to clean the inside and outside of your sanitary pipes in one easy operation – with the only washer that moves solution clear through your pipes. Any length piping or parts can be put in the wash tank and proceed with cleaning.
- Pump discharge piping pushes detergent solution through flared jets causing solution to recirculate through pipe laid inside the tank. Pump suction pulls solution repeatedly by the recirculation pump.
Push/Pull Option Includes: Push/pull piping and base for pump, flared jets, clamps and fittings included. 8′, 10′, or 12′ options.
- Push-Pull System can be installed on any tank, but is particularly efficient on longer length tanks where single line systems and high volume, high turbulence systems fail.
- System includes a double, closed loop stainless pipe line. Double line permits a suction and discharge fitting to be mounted on each end of the tank. Inlets are vertically mounted and fan shaped to control solution flow for proper disbursement plus continued action in half the tank cross-section. Outlets, or pump suctions, are screened and located opposite from fan-blade inlets.
- Such controlled flow is at a rapid rate with a minimum of energy loss due to excessive turbulence. Loose pipe gets cleaned as if it were in place because the clear through action, and parts are effectively scoured due to solution action coming from both directions.
Pump and Motor:
5 HP (enclosed impeller), TEFC, 3-Phase, 3500 RPM. Also have options for 7.5, 10 and 15 HP Motors
Options:
Steam Regulator: Part # 32510, ½” Powers, mounted for in-tank heating. Also ¾”, 1”, 1 ¼”, and 1 ½” Models Available.
Casters: Standard with adjustable ball feet; option for 5” Heavy-duty composition wheels, Part # 30393 set of (4).
Parts Basket: Part # 31303, URWB-6 “Valves and Small Parts Basket” Deep, fabricated with 1/4″ stainless round bar frame and handles and 1/8″ stainless wire meshed to 7/8″ square openings. 24″ handle. 22″L X 10.5″W X 10″ Depth. Many other basket styles available, See Handling and Storage Equipment.
CIP Valves: Stainless three-way valve in pump outlet to enable CIP work.
OR (2) Butterfly valves and Tee – Installed. OR (2) air-actuated butterfly valves.
Model 150 Sanitary Pipe Cleaning Tank:
Pictured Above: Safgard Sanitary Pipe Washer Model 150-1SR: One Compartment, no pipe racks or back apron tray as on models 119.
This Pipeline COP Washer also easily made from Model 150-1S and 150-2S Sanitary Pipeline Wash Tanks. The back apron tray and pipe storage racks on 119 Series are omitted on 150 Series, otherwise they are the same.
Model 150-1SR
Tank: 150-1S2, 10 Ft., Ball Feet
Push-Pull Piping
Pump Base
Pump: I.e. 5 HP/3/60/220/440
Additionally, Both 150 and 119 Series’ available in 16 ga. SS rather than 14 ga. Models 1619-1, 1650-1
- Only in 6′ and 10′ sizes and with one or two compartments. Compartment separation is double wall with 1″ radius corners.
Options:
- 1 Set (4) Casters: Medium Heavy Duty, Heavy Duty or Heavy Duty with Brakes;
- Perforated Stainless Undertrays, for 6′ Tank or 10′ Tank (Single or Double)
- Pipe Racks (Can be added or removed from 1619 Series; 2 supplied with 6′ Tank, 4 with 10′)
- 119-1S2: Stainless steel complete No. 2B all welds ground and polished
- 119-1S4: Stainless steel complete No. 4 polished finish all over, all welds ground and polished
- 119 Series available in 16 ga. SS in 6′ and 10′ with one or two compartments,
- Ex. Part numbers: Model 119 16 ga. 1619-1 6′ (1 compartm. 6′) 1619-2 10′ (2 compartm., 10′)
Another Option for Pipe Washing:
Safgard Power Brush Washers: You need the Safgard Pipe Washer Power Assembly for fast and positive cleaning of hot lines, such as chocolate lines. The thousands of assemblies in use have saved millions of man hours, while also doing perfect cleaning. Get your share of the savings now and order the Power Brush Washer Model 119-APS.
Model 119APS: Power Brush Washer Assembly with Stainless Steel Access
Includes: Heavy-Duty Housing 1″ SS Pipe, Brush Motor, and Detergent Pump.
