Tee-Line Strainer
Schlueter Safgard Tee Strainers
- Low-Cost, Durable Strainer Solution to Protect Your Process Equipment
- Safgard Tee-Line Strainers protect your process pumps and equipment from gaskets, bolts and agglomerated materials.
- Tee-Line strainers are installed before the suction end of your pump as economical protection for your process equipment.
- Standard Tee-Line strainers have an open area approximately the same size as the pipeline it is fitted in. Partial blocking of the perforated area will not appreciably increase line pressure. • • Safgard Tee-Line Strainers are CIPable.
Category: Components, Strainers
More Information
| Safgard Tee-Line Strainer Assemblies | ||||
|---|---|---|---|---|
| Strainers with 1/4" Perforated Insert | Strainers with 1/8" Perforated Insert | |||
| Material | Connection Size (Inches) | Part # | Connection Size (Inches) | Part # |
| 304 SS | 1.5 | 31863 | 1.5 | 31876 |
| 304 SS | 2 | 31863-1 | 2 | 31877 |
| 304 SS | 2.5 | 31863-2 | 2.5 | 31878 |
| 304 SS | 3 | 31863-3 | 3 | 31879 |
| 304 SS | 4 | 31863-4 | 4 | 31880 |
| 304 SS | 6 | 31881 | 6 | 31863-5 |
| *Strainers include Tee-Line Strainer housing, gasket, insert and clamp | ||||
Tee-Line Strainer Assembly Features:
- Materials: 304 stainless steel
- Finish: 32 Ra / #4
- Fittings: Standard fittings are quick clamp type
- Connection Sizes: 1.5 ” – 4.0″
- Operating Pressure: 100 psi max recommended
- Insert Construction: The curved, perforated insert is shaped like a curled tongue and is welded to a standard clamp-style cap with a stainless steel bar handle.
- Standard Insert: ¼” Perforated (available in 1/8″ upon request)
- Full Assembly: Tee-Line Strainer housing, insert, tri-clamp and gasket
Note: Cap/Strainer Inside – Only Available from 1 ½ – 4″ for ¼” perforated and 1/8″ perforated as well.
| Tee Strainers Inside, Clamp Connections (Specify 1/4" or 1/8" perf.) | |
|---|---|
| Inside Only Replacement Sizes | Part Number |
| 1.5" | 31864 |
| 2.0" | 31864-1 |
| 2.5" | 31864-2 |
| 3.0" | 31864-3 |
| 4.0" | 31864-4 |
Note: The curved side of insert should be positioned facing the flow to capture particulate.
Strainer Assemblies include tee-line strainer housing, gasket, insert and clamp
